Chhajed Steel & Alloys Pvt. Ltd.



Alloy Steel Plates (SA 387 GR 5)


Alloy Steel Plates (SA 387 GR 5)

Looking forward to attain 100% customer satisfaction, we as a well-known name put a great effort in delivering brilliance. Alloy Steel Plates (SA 387 GR 5) are available in a wide range of variety. They are made under the stern regulation of proficient professionals to ensure there is no compromise with the quality. Such perfect manufacturing makes it optimum for use in weldable carbon steel weight vessels at hoisted temperatures.

 

Tension Test Requirements : The material shall be tested using a test specimen and will confirm to the tensile requirements as outlined in above table.

Other requirements : The following requirements and testing procedures (which are not mandatory) are considered suitable for Chrome Molybdenum steel -

  • Vacuum treatment
  • Product Analysis
  • Additional Tension Test
  • Charpy V-Notch Impact Test
  • Drop Weight Test
  • High Temperature Tension Test
  • Ultrasonic Examination
  • Magnetic Particle Examination

Features

Model Number Alloy Steel Plates (SA 387 GR 5)
Material Alloy Steel
Thickness 5mm to 60mm
Length 5000 / 6000 / 12000
Grade SA 387 GR 5
Alloy Steel Plates (SA 387 GR 5) 80

Additional Information

Min. Order Quantity 1 Piece(s)
Payment Terms L/C, T/T
Delivery Time Ready Stock


Equivalents

BS EN ASTM/ASME DIN
... ... SA387-5-2 ...

Chromium & Molybdenum Content Asme Specification

Designation Nominal Chromium
Content (%)
Nominal Molybdenum
Content (%)
SA387 Grade 5 0.05 0.005

Chemical Requirements

Element  
 -
Chemical Composition (%)
SA 387 Grade 5
Carbon Heat Analysis 0.15 max
Product Analysis 0.15 max
Manganese Heat Analysis 0.30 - 0.60
Product Analysis 0.25 - 0.66
Phosphorus
 
Heat Analysis 0.035
Product Analysis 0.035
Sulphur (max)
 
Heat Analysis 0.03
Product Analysis 0.03
Silicon Heat Analysis 0.50 max
Product Analysis 0.55 max
Chromium
 
Heat Analysis 4.00 - 6.00
Product Analysis 3.90 - 6.10
Molybdenum Heat Analysis 0.45 - 0.65
Product Analysis 0.40 - 0.70

Tensile Requirements For Class 2 Plates

Designation Requirement Grade 5
SA387 Grade 5 Tensile strength, ksi [MPA] 75 to 100 [515 to 690]
Yield strength, min, ksi [MPa]/(0.2% offset) 45 [310]
Elongation in 8 in. [200mm], min % -
Elongation in 2 in. [50mm], min, % -
Reduction of area, min % 45 (measured on round specimen)
40 (measured on flat specimen)