Chhajed Steel & Alloys Pvt. Ltd.



Alloy Steel Plates (SA 387 GR 9)


Alloy Steel Plates (SA 387 GR 9)

On the back of our state of the art facility, we are able to present high quality Alloy Steel Plates (SA 387 GR 9) to the customers. In compliance with the requirements of customers, we are committed towards offering the best grade. We source the raw material from the most reliable vendors of the industry so that we can manufacture making use of top notch material. A number of specifications are available for our customers at their request. They are easily available at market leading rate.

 

Tension Test Requirements : The material shall be tested using a test specimen and will confirm to the tensile requirements as outlined in above table.

Other requirements : The following requirements and testing procedures (which are not mandatory) are considered suitable for Chrome Molybdenum steel -

  • Vacuum treatment
  • Product Analysis
  • Additional Tension Test
  • Charpy V-Notch Impact Test
  • Drop Weight Test
  • High Temperature Tension Test
  • Ultrasonic Examination
  • Magnetic Particle Examination

Features

Brand Name ALLOY STEEL
Length 5000 / 6000 / 12000

Additional Information

Min. Order Quantity 1 Piece(s)
Payment Terms L/C, T/T
Delivery Time Ready Stock


Specification Chromium & Molybdenum Content Asme Specification

Designation Nominal Chromium
Content (%)
Nominal Molybdenum
Content (%)
A387 Grade 9 0.09 0.01

Chemical Requirements

Element - Chemical Composition (%)
SA 387 Grade 9
Carbon Heat Analysis 0.15 max
Product Analysis 0.15 max
Manganese Heat Analysis 0.30 - 0.60
  Product Analysis 0.25 - 0.66
Phosphorus Heat Analysis 0.03
Product Analysis 0.03
Sulphur (max) Heat Analysis 0.03
Product Analysis 0.03
Silicon Heat Analysis 1.00 max
Product Analysis 1.05 max
Chromium Heat Analysis 8.00 - 10.00
Product Analysis 7.90 - 10.10
Molybdenum Heat Analysis 0.90 - 1.10
Product Analysis 0.85 - 1.15
Vanadium Heat Analysis 0.04 max
Product Analysis 0.05 max

Tensile Requirements For Class 2 Plates

Designation Requirement Grade 9
SA387 Grade 9 Tensile strength, ksi [MPA] 75 to 100 [515 to 690]
Yield strength, min, ksi [MPa]/(0.2% offset) 45 [310]
Elongation in 8 in. [200mm], min % -
Elongation in 2 in. [50mm], min, % -
Reduction of area, min % 45 (measured on round test specimens)
40 (measured on flat test specimen)